MICRO-RAY is a detection barrier with linear microwave rays developed by CIAS laboratories, based on a deep knowledge of microwave technology and signal analysis, coupled with long experience of real-world perimeter requirements. The idea was born from the need for an alternative to infrared rays, which are normally used to protect very narrow corridors, but which by their nature have many limits that can negatively affect performance. Infrared beams are especially vulnerable to climatic conditions such as temperature, glare, solar reflections, fog, and need frequent maintenance such as cleaning of the cover. SPECIFICATIONS SENSOR TYPE 24Ghz BISTATIC LINEAR MICROWAVE BARRIER RANGE 100m MW RAY Ø 40cm (MINIMUM SPACE CLEARANCE REQUIRED 1m) PROBABILITY OF DETECTION 98% COMPLIANT WITH EN50131-1 GRADE 4 SIGNAL ANALYSIS DIGITAL FUZZY LOGIC MAX. NUMBER OF RAYS 4 PER COLUMN (SEE INSIDE DIAGRAM) POWER CONSUMPTION 120mA PER BEAM (TX + RX) POWER SUPPLY 230Vac/13.8Vdc WITH POWER KIT OR PoE 802.3 AF WITH MICRO-RAY-IP-PoE MODULE (1 PER TOWER) BEAM INTERRUPTION TIME FROM 10ms TO 1sec IP RATING IP55 OPERATING TEMPERATURE -35°C +65°C CONFIGURATION EMBEDDED ALIGNMENT TOOL SPECIAL OUTPUTS RS485 OR IP THROUGH MICRO-RAY-IP-PoE (1 PER COLUMN) RELAYS OUTPUTS ALARM/FAULT/TAMPER PER EACH RAY MTTR (MEAN TIME TO REPAIR) 25 MINUTES COLUMN RAL 7035 COLUMN Ø 180 mm
