SENSOR UL HUMO FOTOELECTRICO Y CALOR TEMPERATURA FIJA 135F COLOR BLANCO Intelligent UL Photo Smoke W/ Thermal Sensor White MODELO: MIX-2351TAP MARCA: MIRCOM Description The Select Series low profile smoke detectors are intelligent addressable plug-in detectors with point ID capability that enables each detector address to be set with rotary address switches providing exact device locations. Detector sensitivity is continually monitored and reported to the fire alarm control panel. These intelligent sensors utilize a state-of-the-art thermistor sensing circuit for fast response. Mircom’s Advanced Protocol uses a high speed communication protocol that greatly increases the speed of communication between the intelligent devices. The modern design and expanded color options support contemporary aesthetic demands. In addition, each detector is constructed for exceptional installation and maintenance efficiency. The Select Series MIX-2351AP(A) photoelectric detector’s re-designed optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The sensitivity of Select Series detectors can be programmed using the control panel software to suit the environment. The MIX-2351RAP(A) photoelectric detector is also remote test capable for use with a duct smoke detector. The MIX-2351TAP(A) multi-sensor detector offers both photoelectric detection and thermal detection through dual electronic thermistors at 135°F (57°C) fixed temperature thermal sensing. The multi sensor transmits an analog representation of the smoke density and temperature over a communication line to the compatibly listed Fire Alarm Control Panel, such as the Mircom Flex-Net. The FACP is able to illuminate LED display points based on the values received from the sensor. The LED indications can be displayed for temperatures below 90°F, between 90°F and 135°F, and above 135°F. This can be used for Fire Service Access Elevator (FSAE) display (Temperature sensing per NFPA 72 2019 21.5). Features • Multi-criteria detection • Designed to meet UL 268 7th Edition and UL 521 Listed. (MIX-2351AP/TAP/RAP) • Designed to meet CAN/ULC S529 Rev. 4 and CAN/ULC S530 listed. (MIX-2351APA/TAPA/RAPA) • New modern profile • Analog communications • Low standby current • Rotary address switches • Dual LEDs for 360° visibility • Expanded color kit options
